What is the purpose of the "thin" flexible current clamp design compared to standard iFlex probes?

Thin clamps fit into tighter spaces—behind cable trays, in conduit runs, and between closely spaced conductors in dense electrical cabinets—enabling non-intrusive measurement where standard probes cannot fit.

Why would a power quality auditor choose a 4-phase set instead of individual clamps or a 3-phase probe kit?

Four clamps enable simultaneous measurement of three-phase power plus a fourth channel for neutral current, earth fault monitoring, or secondary circuit analysis—capturing complete power distribution in one measurement campaign.

What frequency range (40 Hz to 5 kHz) covers, and why is it important for power quality measurement?

This range captures fundamental grid frequency (50 Hz in the GCC) plus harmonics up to the 100th harmonic, enabling detection of power quality disturbances from non-linear loads like VFDs and switching power supplies.

Can technicians use the 36-inch thin clamps on modern data center power distribution equipment with high conductor density?

Yes, thin flexible design suits densely packed modern electrical infrastructure; for specific cable routing scenarios, contact Procure.ae for compatibility confirmation.

Does the thin design affect measurement accuracy compared to thicker, more rigid current clamps?

Thin clamps are optimized for accuracy across the 0.8 A to 6000 A range; contact Procure.ae for accuracy specifications and any scenarios where standard clamps might be preferable.

Are the four clamps identical, or is one configured differently for neutral or fault current measurement?

All four clamps are identical; they connect interchangeably for flexible measurement of three-phase power, four-wire systems, or multi-channel load monitoring.

How quickly can Procure.ae deliver the FS3000/6000A 4-phase thin clamp set to an industrial or data center facility in the GCC?

Specialized power quality equipment ship based on availability; contact Procure.ae for current lead time and any expedited options for critical power infrastructure projects.

Does Procure.ae provide technical commissioning or guidance when the thin clamp set is deployed at a data center or power-critical facility?

Procure.ae supports critical infrastructure projects; reach out to discuss installation coordination, measurement validation, and technical assistance.

What cable length or connection type do the thin clamps use to connect to a data logger or power analyzer?

Contact Procure.ae for cable specifications, connector types, and compatibility with Fluke and third-party power quality analyzers.

Are the four clamps calibrated to identical standards, and is calibration documentation included?

Yes, matched sets are factory-calibrated; contact Procure.ae for calibration certificates and recommended recalibration intervals for continuous deployment.

Does the 4-phase set come with protective cases or storage/organization solutions for the four clamps and cables?

Contact Procure.ae for included accessories, protective cases, and recommended storage methods for thin flexible clamps in industrial environments.

Home
Fluke FS3000/6000A 4-Phase Thin Flexible Current Clamp Set, 36 Inch

Fluke FS3000/6000A 4-Phase Thin Flexible Current Clamp Set, 36 Inch

Name: Fluke FS3000/6000A 4-Phase Thin Flexible Current Clamp Set, 36 Inch
Brand: Fluke
SKU: FS3000-6000A-TF-4-II

The Fluke FS3000/6000A-TF-4 thin flexible current clamp set supports 4-phase AC current measurements from 0.8 A to 6000 A over a 40 Hz to 5 kHz frequency range, ideal for non-intrusive current monitoring in power quality logging applications.

Overview

The Fluke FS3000/6000A-TF-4 is a 4-phase thin flexible current clamp set designed for use with Fluke power quality loggers and analysers. The 36-inch thin flexible coils allow installation in congested panel boards and bus bars where rigid clamps cannot fit, while still delivering accurate AC current readings from 0.8 A up to 6000 A. With a frequency response of 40 Hz to 5 kHz, the set covers fundamental power frequencies and key harmonics for thorough power quality analysis.

Key Features

Supports 4-phase simultaneous current measurement in a single set
Wide current range from 0.8 A to 6000 A AC for diverse installation types
Frequency range of 40 Hz to 5 kHz enabling harmonic analysis capability
36-inch thin flexible coil design for installation in confined switchboard panels
Non-intrusive measurement method without interrupting live circuits

Specifications

Brand: Fluke
Color: Red
Current Range: 0.8 A to 6000 A (AC)
Frequency Range: 40 Hz to 5 kHz
Number of Phases: 4
Coil Length: 36 inch (thin flexible)
Type: Thin Flexible Current Clamp Set

Why buy from Procure.ae

Procure.ae supports institutional and corporate buyers across the UAE and GCC with genuine Fluke test and measurement accessories. Our procurement team handles bulk quotations, technical queries, and coordinated delivery to site. Contact us to request a quote for the Fluke FS3000/6000A-TF-4 or any other Fluke measurement accessories.

FAQ

What Fluke instruments is this clamp set compatible with?
The FS3000/6000A thin flexible clamp set is designed for Fluke power quality loggers and analysers that accept flexible current sensor inputs in the 3000 A to 6000 A measurement class.

Can this clamp set be used on live circuits?
Yes. The thin flexible coil design allows non-intrusive, non-interrupting installation around conductors in live switchboards and panel boards.